Skip to content

Migrating from Frigate Blueprint

Camera AutoNotify can replace the Frigate Notifications blueprint. There are no automations to keep up to date: every Frigate camera is found and set up by itself, with settings that work as they come, and the notifications go through Supernotify, which handles phones, sounds, emails with image attachments, spoken announcements, priority and who's told.

Most blueprint automations need nothing copied across at all. Only the filters and timing you changed from the blueprint's defaults need setting again, and a few of those defaults differ here, so check the defaults that differ before you start.

This page compares against the blueprint's Stable release of 13 November 2026, 0.14.0.2y.

Before You Start

You need the same things as the blueprint, apart from the automations:

  • The Frigate integration, with its notification proxy on, as the blueprint also needs
  • MQTT in Home Assistant, on the same broker as Frigate
  • Home Assistant's external URL, or its internal one, set in Settings, System, Network. The blueprint's base_url input isn't needed, since this is used instead
  • Supernotify from Marketplace (previously HACS), for the snapshot, the clip, sounds, critical alerts and updates. Without it, only the first notification of each review is sent, as plain text

Moving Over

  1. Write down what you changed. For each of the blueprint's automations, open it in Settings, Automations & scenes, choose Edit in YAML from its menu, and copy the use_blueprint input section somewhere. Only the inputs listed there differ from the blueprint's defaults. One automation may cover more than one camera, so note which.
  2. Install Camera AutoNotify from the Home Assistant Marketplace, and restart.
  3. Add the integration in Settings, Devices & services. To be told only by Camera AutoNotify from the start, turn Set up cameras automatically off on the first screen and add each camera when you're ready, from Discovered. Otherwise leave it on, and every camera is set up straight away.
  4. Disable the blueprint's automations once the cameras are set up, or you'll be told twice. Disable rather than delete them until you're happy, so you can go back.
  5. Set each camera's settings from what you wrote down, using the table below. A camera's settings are under its entry on the integration's page. Watch the units, since the blueprint's Timeout is in minutes and Stop updates after is in seconds.
  6. Set who's told. Leave the targets empty and Supernotify chooses, as it's set up to. To tell only some, choose them under Image and targets in a camera's settings, or set up recipients and deliveries in Supernotify itself, once, for every camera.
  7. Name your objects, if your blueprint had label_names, or you'd rather Frigate's car said "Vehicle", or have your own translations. See Object Names.
  8. Try it. Walk in front of a camera, and check the notification, its image, and that tapping it plays the clip.

Where Each Input Is Now

Blueprint input Where it is now
camera One entry per camera, found by itself
base_url, client_id, mqtt_topic Read from the Frigate integration and Home Assistant's URL, nothing to set
review_severity Severity
labels Objects
zones, zone_multi, zone_order_enforced Zones, Every zone and Zones in order
cooldown, initial_delay, final_update, final_delay, alert_once The Timing section, as Cooldown, Initial delay, Notify when over, Delay when over and Sound only the first
timeout Stop updates after, in the Timing section, in seconds rather than minutes
update_sub_label Notify recognised faces and plates, in Timing
label_names Object names in Global Settings, for every camera at once. See Object Names
notify_device, notify_group Targets, or Supernotify's recipients and mobile push delivery
critical, interruption_level, sound, volume Supernotify, from the priority of the notification
tts, tts_helper A Supernotify TTS delivery
group, tag Set by camera and by review, nothing to set
attachment Image, under Image and targets: the snapshot, the snapshot with its bounding box, the snapshot cropped to the object, the thumbnail, or an animated GIF preview, which has no bounding box or crop, and shows the snapshot until it's ready
attachment_2 The same Image for the first notification and its updates, and GenAI image for what GenAI adds, the animated preview to begin with
video, ios_live_view Not attached, see Video on iPhones. Tapping the notification plays the clip
tap_action, button_1 to button_3 Tap for the clip, a View snapshot button, and the buttons of Actions, such as Keep clip and Mark reviewed. See Actions
button_3 silence, silence_timer Supernotify's camera snooze
title, message, subtitle Fixed wording, not editable, translated into Home Assistant's language where there's a translation
genai_notification_title Frigate's own title for a GenAI review summary, with no prefix, since the threat level sets the notification's priority instead. See GenAI Notifications
color, icon, sticky, channel, android_auto Supernotify's mobile push delivery, where it has them
presence_filter, state_filter, disable_times, master_condition, custom_filter Not offered yet. Supernotify's scenarios and snoozing cover some of these
loiter_timer Not needed, since the blueprint no longer uses it for reviews
custom_action_manual, custom_action_auto, custom_action_auto_multi Not offered
telegram_*, tv_* Not offered, though both can be Supernotify deliveries
debug, redacted Supernotify's archive, and the integration's diagnostics, which leave out targets

Defaults That Differ

Where your blueprint automation left one of these inputs as it came, the camera's setting here may still need changing to keep what you had.

Blueprint input Blueprint default Setting here Default here
review_severity Alerts and detections Severity Alerts
cooldown 0 seconds Cooldown 30 seconds
alert_once Off Sound only the first On
final_delay 5 seconds Delay when over 0 seconds
timeout 2 minutes Stop updates after 600 seconds, 10 minutes
attachment Thumbnail Image Snapshot with bounding box

Object Names

The blueprint's label_names is now Object names, in Global Settings, and applies to every camera and zone. Each object Frigate tracks or hears can be given a name of its own, chosen from those in Frigate's config, or typed in. Use it to translate the objects into your own language, or just to say what they are in your home:

Object Name
car Vehicle
motorcycle Vehicle
person Visitor

Objects named the same are said once, so a review of a car and a motorcycle reads "Vehicle detected at Gate". Objects not named keep Frigate's name, with a capital letter, as the blueprint does. The faces and plates Frigate recognises are kept as they are, in brackets.

The rest of the wording, such as "detected at", is translated into the language set for Home Assistant, where the integration has a translation of it, and is English otherwise.

What Isn't Offered Yet

  • Filters on presence, the state of an entity, the time of day, or a template, the blueprint's presence_filter, state_filter, disable_times, master_condition and custom_filter. Supernotify's scenarios cover most of what these were used for, such as more urgent notifications when everyone's out or the alarm is set, and its snoozing covers quiet times
  • Editable title and message. The wording is fixed, though rules can change a notification's priority, silence it, or apply scenarios by what it says
  • Custom actions run with each notification
  • Video attached to the notification, and iOS live view. The clip plays when the notification is tapped instead
  • Telegram and TV notifications of the integration's own, though both are built into Supernotify, so can be easily switched on
  • A different image for updates than for the first notification

What's New

Things the blueprint doesn't do:

  • Cameras set up by themselves, including any added to Frigate later, with no automation per camera
  • Zones of their own, each notifying for reviews from any camera it's on. See Zones
  • GenAI review summaries and object descriptions, each updating the review's notification, with the priority set by the threat level Frigate's GenAI gives. See GenAI Notifications
  • Rules on what any notification says, to raise its priority, silence it, or apply Supernotify scenarios
  • Buttons for what Frigate can do: Keep clip from Frigate's retention, Mark reviewed in Frigate, Submit to Frigate+ the snapshot, or Export recording, each offered only where Frigate can do it, and chosen for every camera or each one. See Actions
  • What Frigate knows, beyond the review, said under the headline: the speed through a speed zone, a plate read that Frigate doesn't know, a delivery company's logo, a face seen but not recognised, a car that has stopped, or a gate left open. See What Frigate Knows
  • More images: the snapshot with the object's box, to begin with, or cropped to it, or Frigate's animated preview of the event, the same GIF Frigate's own review shows, which is also the image of what GenAI adds, to begin with, since it's what GenAI looked at. Where Frigate can't make the preview, the still image is shown instead, and with Supernotify v2.19.0 or later, an image that can't be fetched at all raises a Home Assistant repair linking to the camera's settings. See When the Image Can't Be Fetched
  • Periodic GenAI reports, of the day, or of anything suspicious every few hours, by e-mail or another delivery, asked for again when Frigate fails to write one, and its failure notified, with why and where to look. See Periodic Reports
  • Health checks, telling you when a Frigate server stops responding, or a camera stops sending video, and when it's back, with cameras switched off on purpose kept quiet. See Health Check
  • Supernotify for every notification
  • priority, critical alerts and sounds set once for every camera
  • delivery by phone, e-mail, chime, speaker or anything else it has
    • Use a chime from a doorbell or Alexa device if you want for low priority Frigate events
    • Have notifications go out with push mobile alerts and an e-mail with attachments
    • Pick from any of he 22 different Supernotify transports and the Frigate Recipes
  • snoozing, scenarios by who's home or whether the alarm is set
  • discovers and sends to all mobile devices automatically
  • archive of what was sent including all the rules on why delivery choices made
  • A device for each camera, linked to Frigate's own, from Home Assistant 2026.8
  • A warning for cameras that autotrack, whose zones move with them, in the camera's settings
  • Translated into Deutsch, English, Español, Français, हिन्दी, Italiano, Português and Português (Brasil), for the notifications, in the language set for Home Assistant, and for the settings

Going Back

Delete Global Settings first, so the cameras aren't found and set up again, then each camera and zone, and re-enable the blueprint's automations. Camera AutoNotify adds no automations, scripts or YAML of its own, and changes nothing in Frigate, so there's nothing else to undo.